|
Swing Sets |
|
![]() |
Unlike WOOD play sets currently on the market, this one isn't going to warp, rot, crack or splinter. No chemical treatments!Never again is there a need to paint or stain your play set every year to keep it looking like the envy of your neighborhood. With minimal maintenance, this durable set is safe for kids of all ages. Be wary of the high priced competitors offering "lifetime" warranties. There are so many exclusions, including the exclusion of weather damage. A long warranty isn't worth much when the company isn't around to support you! |
|
A-Frame Swing Set
Give your kids a break from TV. With this backyard swing set, they can
entertain themselves in the fresh air and sunshine for hours--right in
the convenience of your own yard! A metal swing set construction means
low maintenance for you. Unlike a wooden swing set, with a metal
construction you don't have to worry about splinters, warping, or rough
edges. It is constructed of powder-coated steel to resist rusting, and
UV-protected polyethylene plastic to reduce heat retention, fading, and
discoloration. This backyard swing set meets ASTM safety standards and
is designed with rubberized chain grips to prevent little fingers from
getting pinched.
13'2"L x 11'3" W x 9'2"H $599 |
![]() ![]() |
We recommend using sufficient material for the listed Fall Height.
This information has been extracted from the CPSC publications Playground Surfacing—Technical Information Guide and Handbook for Public Playground Safety. Copies of these reports can be obtained by sending a postcard to the: Office of Public Affairs, U.S. Consumer Product Safety Commission, Washington, D.C. 20207 or call their toll-free hotline: 1-800-638-2772.
1This data is from tests conducted by independent testing laboratories on a 6 inch depth of uncompressed shredded tire samples produced by four manufacturers. It is recommended that persons seeking to install shredded tires as a protective surface request test data from the supplier showing the critical height of the material when it was tested in accordance with ASTM F1292.